The RFID reader with Ethernet interface is intended for reading of EM-Marine contactless identifiers (125 kHz) and its transmission using Ethernet interface (optionally readers able to read Mifare identifiers (13.56 MHz) and EM-Marine identifiers (125 kHz) are present). Reader provides reading of code from distance from 50 to 100 mm (depending on the conditions of operation).
At voltage +12 V standard distance for reading EM-Marine identifier at bringing the card in parallel to case of the reader is 70…90 mm. Distance for reading is lowering at location of the reader on the metal surface and close to sources of electromagnetic disturbances.
Reader is provided as for internal installation (near computer, in this case interface of the reader is Ethernet and its power supply is taken from USB-port of the computer) and also for outdoor installation in waterproof case and electrical board covered with weatherproof paint (for installation near fuel dispensers, in this case interface and power supply is taken from 12 V DC power supply).
Reader allows to configure buzzer and 2-colors LED for indication (green and red LEDs).
